1 Scope

This clause of Part 1 is replaced by the following.

This part of IEC 60335 specifies safety requirements for electrically operated commercial refrigerating appliances and

ice-makers

NOTE 101 Examples of appliances that are within the scope of this standard are

–

REFRIGERATED DISPLAY

STORAGE CABINETS

– refrigerated trolley cabinets;

– service counters and self-service counters;

– blast chillers and blast freezers;

–

commercial ice-makers

As far as is practicable, this standard deals with the common hazards presented by these types of appliances including those that use

flammable refrigerants

This International Standard is not applicable to appliances with a mass of

flammable refrigerant

It does not cover those features of construction and operation of refrigerating appliances that are dealt with in ISO standards.

NOTE 102 Attention is drawn to the fact that

– for appliances intended to be used in vehicles or aboard ships or aircraft, additional requirements can be necessary;

– in many countries, additional requirements are specified by national health authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities.

NOTE 103 This standard does not apply to

– appliances using

flammable refrigerant

transcritical refrigeration systems

– domestic refrigerating appliances (IEC 60335-2-24);

– split systems having a

refrigerant charge

flammable refrigerant

refrigerating circuit

– industrial refrigerating systems;

– motor-compressors (IEC 60335-2-34);

– commercial dispensing appliances and vending machines (IEC 60335-2-75);

– commercial ice-cream appliances;

– cold temperature rooms;

– multiple refrigerated chambers with a remote motor-compressor.

This part of UL/CSA 60335 specifies safety requirements for electrically operated commercial refrigerating appliances that have an incorporated compressor, refrigerating appliances that are supplied in two or more units for assembly as a single appliance in accordance with the manufacturer's instructions (split system), and partial units intended for installation in a field erected system in accordance with:

– CSA C22.1, Canadian Electrical Code (CE Code) Part I, in Canada;

– NFPA 70, National Electrical Code (NEC), in the United States.

This standard also contains the requirements for:

– commercial refrigerators and freezers for use in fuel dispensing facilities (Annex 101.DVD);

– factory assembled walk in coolers/freezers (Annex 101.DVE);

– refrigerating units (Annex 101.DVF);

–

PARTIAL UNITS

– dispensing units (Annex 101.DVH);

– commercial refrigeration products with rated voltage up to 15 000V (Annex 101.DVR);

– Stirling refrigeration systems; and

– laboratory refrigerators and freezers (for US only).

This standard does not take into account refrigerants other than refrigerant safety groups as defined by ISO 817 or ANSI/ASHRAE 34 as follows:

1. a) A1;

2. b) B1 [for use in appliances installed in machinery rooms as defined in accordance with ANSI/ASHRAE 15 (USA) or CSA B52 (Canada), or outdoors only]; and

3. c) A2L, A2, and A3, refrigerants.

All references to ISO 817 in this Part 2 also apply to ANSI/ASHRAE 34. ANSI/ASHRAE 34 shall take precedence over ISO 817.

NOTE 103 This standard does not apply to

– appliances using flammable refrigerant in transcritical refrigeration systems;

– domestic refrigerating appliances (IEC 60335-2-24);

– motor-compressors (IEC 60335-2-34);

– vending machines (IEC 60335-2-75);

– professional ice-cream appliances (IEC 60335-2-118);

– laboratory refrigerators and freezers (for Canada only. In Canada, the applicable standard for laboratory refrigerators and freezers is CSA C22.2 No. 61010-2-011.)

Summary of Topics

Adoption of IEC 60335-2-89, Household and Similar Electrical Appliances – Safety – Part 2-89: Particular Requirements for Commercial Refrigerating Appliances and Ice-Makers with an Incorporated or Remote Refrigerant Unit or Motor-Compressor Third edition issued by the IEC June 2019, and includes IEC Corrigendum 1 published September 2019, as a new IEC-based UL standard, UL 60335-2-89. Please note that the National Difference document incorporates all of the U.S. national differences for UL 60335-2-89.