1.1 These requirements apply to air dispersion system materials for use in accordance with the following Installation Codes:
a) Standard of the National Fire Protection Association for the Installation of Air-Conditioning and Ventilating Systems, NFPA No. 90A;
b) Standard of the National Fire Protection Association for the Installation of Warm Air Heating and Air-Conditioning Systems, NFPA No. 90B;
c) The International Mechanical Code® (IMC); and
d) The Uniform Mechanical CodeTM (UMC).
1.2 The air dispersion system materials covered by these requirements include preformed lengths of fabric or non-fabric products intended to convey and distribute air.
1.3 These air dispersion system materials are intended to be limited for use in air handling systems in exposed locations operating under positive pressure.
Exception: Air dispersion systems that have been tested to Section 10A (Collapse Test) and labeled with the rated negative pressure are not limited to operating under positive pressure.
1.4 These requirements do not intend to address the joints between sections of air dispersion system materials or end connections.
This revision of ANSI/UL 2518 dated April 6, 2023 is being issued to expand the scope and testing criteria to cover products under negative pressure conditions; 1.3, Section 10A and 11.1.
RevisionsRed Line Std. (4)
CSDS Proposals (3)
CSDS Proposals
An electronic document associated with a UL Standard for Safety or Outline of Investigation, and issued by UL to propose:
UL LLC CRD (0)
Other Updates (0)
Referenced Standards (2)
Reverse Referenced Standards (0)
The cost to purchase this Standard varies depending on whether you are ordering a hardcopy, PDF or combination of the two. We also offer two different types of subscriptions: a one year and a three year.
You will be able to choose your purchase options on the following pages.
To serve you better, please update your account details.
Sample