Standard for Fire Test of Insulated Wall Construction

UL CSDS Proposal Edition 1 Published Date: July 27, 2007 Last Revision: January 04, 2022

Scope

010400-000000-000000

1 Scope

1.1 This test method describes the testing procedures and requirements applicable to insulated wall constructions by use of a standardized large-scale corner test.

1.2 The purpose of this test method is to determine the ability of field or prefabricated insulated wall panels to resist the spread-of-flame over a simulated interior wall surface of a building and the ability of the insulating material to resist damage as a result of the fire exposure. This test method is not intended to evaluate the fire resistance afforded by the structural members of the test structure such as columns, beams, girders, bar joists, tie bars, and the like.

1.3 These requirements do not cover the evaluation of panels intended for various uses other than as specified in 1 for which there are other established test standards as follows:

a) Surface Burning Characteristics Classification – Establishes the comparative burning characteristics of building materials and assemblies by measurement of flame spread over exposed surfaces and the density of the smoke developed during the fire exposure period. This test method is described in the Standard for Test for Surface Burning Characteristics of Building Materials, UL 723.
b) Fire-Resistance (hourly rating) – Establishes hourly fire resistance ratings of building assemblies through large-scale fire exposures under specific loading conditions. This test method is described in the Standard for Fire Tests of Building Construction and Materials, UL 263.
c) Roof-Covering Materials – Establishes performance measurements for coverings relative to resistance to exterior fire spread and penetration. This test method is described in the Standard for Test Methods for Fire Resistance of Roof-Covering Materials, UL 790.
d) Roof-Deck Construction Materials – Establishes performance measurements for roofing systems with respect to resistance to the spread-of-flame and damage from underdeck interior fire exposure. This test method is described in the Standard for Fire Test of Roof Deck Constructions, UL 1256.

1.4 A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire or of electric shock or injury to persons shall be evaluated using appropriate additional component and end-product requirements to maintain the level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard does not comply with this standard. Revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.

Get Update Alerts

About

Digital View

About

Summary of Topics b1040_1_20070727_sum.html

Subject 1040

Bulletin Dated: July 27, 2007

SUMMARY OF TOPICS

The following is being proposed:

1. Reaffirmation of the First Edition of the Standard for Fire Test of Insulated Wall Construction, UL 1040, as an American National Standard.

Back to Standard 1040, Edition 1

The cost to purchase this Standard varies depending on whether you are ordering a hardcopy, PDF or combination of the two. We also offer two different types of subscriptions: a one year and a three year.

You will be able to choose your purchase options on the following pages.

Standard for Fire Test of Insulated Wall Construction

1 Scope

Subject 1040

Bulletin Dated: July 27, 2007

SUMMARY OF TOPICS

You have one or more subscriptions that will expire soon.

You have one or more licenses to assign

Additional information required

Featured Standards

Recently Published

Coming Soon

Email Verification Required