Summary of Topics

This revision of ANSI/CAN/UL/ULC 1254 dated February 9, 2022 is being issued to revise the title of the standard, include Engineered Dry Chemical Extinguishing System Units and changes to salt spray applicability: 1.1 – 1.3, 5.1A, 5.7A, 5.23A, 6.1A, 6.1B, 6.2, Section 32A, Section 33A, 38.2A, 38.4, Section 45A, 65.1, 65.2, Section 65A

1 Scope

1.1 These requirements cover the construction and operation of fixed pre-engineered and engineered dry chemical fire extinguishing system units and fixed automatic extinguisher units intended to be useddesigned, installed, inspected, maintained, and tested in accordance with the Standard for Dry Chemical Extinguishing Systems, NFPA 17 and with the National Fire Code of Canada, as applicable; and; fixed pre-engineered wet chemical fire extinguishing system units intended to be used in accordance with the Standard for Wet Chemical Extinguishing Systems, NFPA 17A; and with the National Fire Code of Canada, as applicable.

1.2 Automatic extinguisher units do not have a manual means of operation and are intended to be used in accordance with the manufacturer's installation instructions. Automatic extinguisher units are not intended for use as a substitute for pre-engineered dry chemicalor engineered extinguishing system units, or for protection of fire risks larger than those specified in the manufacturer's instructions for a single unit by using multiple units.

1.3 Pre-engineered or engineered dry chemical extinguishing system units covered by these requirements are intended to be used in the following fire protection systems:

1. a) Industrial Total Flooding Protection System – A system arranged to discharge dry chemical throughout the intended protected volume. See Fire Test – Total Flooding Protection System, Section 26.

2. b) Class B Local Application Protection System – A system arranged to discharge dry chemical directly onto a specific area of protection. This application of chemical is normally used where no fixed enclosure exists or an extinguishing system is unable to totally flood the fixed enclosure to achieve extinguishment. See Fire Test – Class B Local Application Protection System, Section 27.

3. c) Commercial Cooking Equipment Protection System – A system arranged to discharge dry chemical onto cooking surfaces of cooking appliances and into hood and duct systems used for ventilation of commercial cooking appliances. See the Standard for Fire Testing of Fire Extinguishing Systems for Protection of Commercial Cooking Equipment, UL 300.

4. d) Automobile Service Station Fueling Area Protection System – A system arranged to discharge dry chemical directly onto small spill fires that originate and are maintained within the protected area. See Fire Test – Automobile Service Station Fueling Area Protection System, Section 28.

5. e) Open-Face Paint Spray Booth Protection System – A system arranged to discharge dry chemical into paint spray working areas and into the plenum and duct systems used for ventilation of paint spraying operations. See Fire Test – Open-Face Point Spray Booth Protection System, Section 29.

6. f) Vehicle Paint Spray Booth – A system arranged to discharge dry chemical into paint spray working areas and onto the plenum and duct systems used for ventilation of paint spraying operations. See Fire Test – Vehicle Paint Spray Booth Protection System, Section 30.

7. g) Off-the-Road Vehicle Protection System – A system arranged to discharge dry chemical onto fire risk areas and into volumes of vehicles such as aboveground mobile mining equipment, and mobile earthmoving equipment. See Fire Test – Total Flooding Protection System, Section 26, and/or Fire Test– Class B Local Application Protection System, Section 27, as applicable.